Help having alot of BSOD Lately

Hi a friend told me to come here for some help and told me to attach the dump file, As iv'e have done hope your find what's causing this problem.

Thanks in advance Richard Atkinson



RAMMon v1.0 Build: 1004 built with SysInfo v1.0 Build: 1026
PassMark (R) Software - www.passmark.com

Memory Summary For RICHARD-PC

Number of Memory Devices: 2 Total Physical Memory: 8191 MB (8192 MB) Total Available Physical Memory: 5825 MB Memory Load: 28%

Item	Slot #1	Slot #2
Ram Type	DDR3	DDR3
Standard Name	DDR3-1333	DDR3-1333
Module Name	PC3-10600	PC3-10600
Memory Capacity (MB)	4096	4096
Bus Clockspeed (Mhz)	666.67	666.67
Jedec Manufacture Name	Corsair	Corsair
Search Amazon.com	Search!	Search!
SPD Revision	1.0	1.0
Registered	No	No
ECC	No	No
DIMM Slot #	1	2
Manufactured	Year 0	Year 0
Module Part #	CMZ8GX3M2A1600C9	CMZ8GX3M2A1600C9
Module Revision	0x0	0x0
Module Serial #	0x0	0x0
Module Manufacturing Location	1	1
# of Row Addressing Bits	15	15
# of Column Addressing Bits	10	10
# of Banks	8	8
# of Ranks	2	2
Device Width in Bits	8	8
Bus Width in Bits	64	64
Module Voltage	1.5V	1.5V
CAS Latencies Supported	6 7 8 9	6 7 8 9
Timings @ Max Frequency	9-9-9-24	9-9-9-24
Minimum Clock Cycle Time, tCK (ns)	1.500	1.500
Minimum CAS Latency Time, tAA (ns)	13.500	13.500
Minimum RAS to CAS Delay, tRCD (ns)	13.500	13.500
Minimum Row Precharge Time, tRP (ns)	13.500	13.500
Minimum Active to Precharge Time, tRAS (ns)	36.000	36.000
Minimum Row Active to Row Active Delay, tRRD (ns)	7.500	7.500
Minimum Auto-Refresh to Active/Auto-Refresh Time, tRC (ns)	50.625	50.625
Minimum Auto-Refresh to Active/Auto-Refresh Command Period, tRFC (ns)	160.000	160.000
DDR3 Specific SPD Attributes
Write Recovery Time, tWR (ns)	15.000	15.000
Internal Write to Read Command Delay, tWTR (ns)	7.500	7.500
Internal Read to Precharge Command Delay, tRTP (ns)	7.500	7.500
Minimum Four Activate Window Delay, tFAW (ns)	37.500	37.500
RZQ / 6 Supported	Yes	Yes
RZQ / 7 Supported	Yes	Yes
DLL-Off Mode Supported	Yes	Yes
Maximum Operating Temperature (C)	95	95
Refresh Rate at Extended Operating Temperature Range	1X	1X
Auto-self Refresh Supported	No	No
On-die Thermal Sensor Readout Supported	No	No
Partial Array Self Refresh Supported	Yes	Yes
Thermal Sensor Present	No	No
Non-standard SDRAM Type	Standard Monolithic	Standard Monolithic
Module Type	UDIMM	UDIMM
Module Height (mm)	46	46
Module Thickness (front), (mm)	2	2
Module Thickness (back), (mm)	2	2
Module Width (mm)	133.5	133.5
Reference Raw Card Used	Raw Card B Rev. 0	Raw Card B Rev. 0
DRAM Manufacture ID	0	0
# of DRAM Rows	0	0
# of Registers	0	0
Register Manufacturer
Register Type
Register Revision	0	0
XMP Attributes
XMP Revision	1.2	1.2
Enthusiast / Certified Profile
Module voltage	1.50V	1.50V
Clock speed (Mhz)	800.00	800.00
Minimum clock cycle time, tCK (ns)	1.250	1.250
Supported CAS latencies	6 9	6 9
Minimum CAS latency time, tAA (ns)	11.250	11.250
Minimum RAS to CAS delay time, tRCD (ns)	11.250	11.250
Minimum row precharge time, tRP (ns)	11.250	11.250
Minimum active to precharge time, tRAS (ns)	30.000	30.000
Supported timing at highest clock speed	9-9-9-24	9-9-9-24
Minimum Row Active to Row Active Delay, tRRD (ns)	7.500	7.500
Minimum Active to Auto-Refresh Delay, tRC (ns)	50.625	50.625
Minimum Recovery Delay, tRFC (ns)	160.000	160.000
Minimum Write Recovery time, tWR (ns)	15.000	15.000
Minimum Write to Read CMD Delay, tWTR (ns)	7.500	7.500
Minimum Read to Pre-charge CMD Delay, tRTP (ns)	7.500	7.500
Minimum Four Activate Window Delay, tFAW (ns)	37.500	37.500
Maximum Average Periodic Refresh Interval, tREFI (us)	7.750	7.750
Write to Read CMD Turn-around Time Optimizations	No adjustment	No adjustment
Read to Write CMD Turn-around Time Optimizations	No adjustment	No adjustment
Back 2 Back CMD Turn-around Time Optimizations	No adjustment	No adjustment
System CMD Rate Mode	2T	2T

Cpu-z
Attached